Rotary Blade type Compressor

Rotary blade type compressor

Rotary Blade Type Compressor:

Mechanism for Pupping fluid by Revolving Blades inside Cylindrical Housing.

 The Rotary Blade type Compressor Could an Eccentric Cylinder model.

Rotary blade type Compressor in side:

1. Cylinder.
2. Roller.
3. Vane.
4. Crank shaft.
5. Main Bearing.
6. Mid plate.
7. Muffler.
8. Sub Bearing.
9. Accumulator.
10. Suction pipe.
11. Rotor.
12. Stator.
13. Shell.
14. Top Cap.
15. Bottom Cap.
16. Tri-plate.
17. Discharge pipe.
18. Terminal.

Rotor Construction:

 In the Rotating blade type Compressor, the rotor is a fixed port of the shaft. Its length must be Accurate to . 0005 in. It cannot have any scores on the outer surface.
  It slots must be free burrs and they must be true. The blades are lapped to fit the width and length of the slots. Usually the slots are on a radius to the center of the shaft, but one company puts the slots at angle to prevent the blades from touching the cylinder until the compressor has almost reached its operating speed, thus reducing the starting load.

Blade Construction:

The Rotating blade type Compressor usually has tow to four blades.